Product Detail

DTR181ZJ

18V Cordless Rebar Tying Tool


Features


  • Developed to enable to tie large diameter rebars that DTR180 cannot
  • Applicable to large diameter rebars
    The tool tip portion of tying mechanism is redesigned from DTR180 to enable to tie large diameter rebars that thecurrent model cannot
    Compatible with thick rebars (D22 x D25)
  • Extension handle available as option allows you to operate in a stand-up position, reducing lower back strain
  • 6-stage adjustable tying strength
    Tying strength can be adjusted to suit the combination of rebars simply by operating the panel located above thebattery
  • Tying rebars can be done automatically in a various range of applications such as building concrete foundations
  • Continuous actuation mode for efficient continuous tying
  • Users can tie rebars by only pulling contact arm against rebars if they continuously hold the trigger

Specification

 

Thumbnail
Model NameDTR181ZJ
Product Name18V Cordless Rebar Tying Tool
Applicable Tie WireAnnealed wire: 21 Ga (0.8 mm)
Galvanized wire: 21Ga (0.8 mm)
Poly coated wire: 20 Ga (0.9 mm)
Applicable RebarsD16 x D16 - (D13 x 2) x (D16 x 2)
Dimensions (L x W x H)317 x 93 x 318 mm
(12-1/2 x 3-5/8 x 12-1/2")
Net Weight2.4 - 2.7 kg (5.3 - 6.0 lbs.)
Work Amount5000 times with BL1860B
Tying (D16 x D16 Rebar)

Standard Equipment
Nylon Brush, Hex Wrench, Hook, + Screw

Available Option
ZJ: With 1x Makpac Connector Box, Without Charger & Battery

*Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.
Loading...